A complete "tension stringing equipment set" works as a synchronized system to control conductor installation:

• Hydraulic Puller: Located at one end of the section being strung, it pulls the pilot rope, which in turn pulls the conductor through the OHTLstringingequipment.com/Stringing-Blocks--Sheaves.html target='_blank'>Stringing Blocks on the towers. It provides the necessary pulling force with precise speed control.

• Hydraulic OHTLstringingequipment.com/Hydraulic-Conductor-Tensioners.html target='_blank'>Tensioner: Positioned at the other end, it applies a continuous, controlled back tension to the conductor as it is pulled. This prevents the conductor from slacking and ensures it remains clear of the ground and obstacles.

• Reel Stands (Conductor drum stands): Support the large conductor reels and often include braking systems to provide additional tension or prevent overruns.

• Stringing Blocks (Sheaves): Specialized, large-diameter pulleys mounted on towers that guide the conductor smoothly and protect its surface as it is pulled.

• pulling grips & Swivels: Connect the pilot rope to the conductor and allow for rotation to prevent twisting of the conductor.

• Communication System: Essential for continuous coordination between pulling and tensioning sites.

These components work in unison, typically controlled by skilled operators communicating via radio, to ensure the conductor is installed safely, efficiently, and to exact specifications.