Installing a cable pulling sock correctly is crucial for a safe and efficient operation. Our pulling socks are designed for simple and reliable installation. Here’s a general guide:

1. Select the Right Size: Measure the outer diameter of your cable and choose a pulling sock that falls within the specified range for a snug fit.

2. Inspect the Grip: Before each use, visually inspect the sock for any broken wires, fraying, or damage. A damaged grip should never be used.

3. Prepare the Cable: Clean the cable jacket thoroughly to remove any dirt or grease that could reduce the grip's holding power.

4. Slide the Sock On: Ease the open end of the pulling sock over the cable end. For open-ended or lace-up types, follow the specific lacing instructions to secure it tightly around the cable.

5. Secure with Tape: We recommend applying a layer of vinyl or friction tape over the entire mesh of the pulling sock and extending it onto the cable. This prevents snags and adds an extra layer of security.

6. Use a Swivel: Always connect the pulling sock to your pulling line or winch with a ball-bearing Swivel. This is a critical step to prevent the buildup of torsion and twisting in the cable during the pull.